20in x 4¼in Crinkle Spider Rim Spacer
20in x 4¼in Crinkle Spider Rim Spacer
$49.00
20in crinkle-type spider rim spacer with a 4¼in (108mm) nominal width, corrugated steel construction and white painted finish. Maintains the required spacing between dual demountable rims on compatible heavy truck and trailer spider wheel assemblies.
Part number RS7512.
Description
Overview
The 20in x 4¼in crinkle spider rim spacer separates dual demountable rims on compatible heavy truck and trailer spider wheel assemblies. Its corrugated steel band measures 4¼in (108mm) wide and suits 20in wheel arrangements that require this spacer width.
The crinkle profile strengthens the band, while raised edge flanges support its position between the dual rims. A white painted finish protects the steel surface.
Features
- 4¼in (108mm) nominal spacer width for 20in spider wheels.
- Corrugated crinkle profile with reinforced edge flanges.
- Steel construction with a white painted finish.
- Single spacer band for compatible dual-rim assemblies.
Specifications and Materials
Product type: Spider wheel rim spacer band.
Wheel size: 20in.
Nominal spacer width: 4¼in (108mm).
Construction: Corrugated steel band.
Profile: Crinkle type.
Finish: White.
Supplied quantity: 1 spacer band.
Part number: RS7512.
For wheel and rim inspection requirements, refer to the NHVR National Heavy Vehicle Inspection Manual, Section 5
Compatibility and Fitment
Check the original spacer width and profile before ordering. This 4¼in corrugated band suits compatible 20in dual spider wheel arrangements, including the TQ 20in five-spoke spider hub configuration.
Do not substitute a 4in or 4½in spacer without confirming the complete wheel arrangement. Those widths provide different rim spacing, and channel-type spacers also use a different band profile.
The following cross-reference numbers identify equivalent spacer bands for this configuration. Compare the original spacer width and corrugated profile before fitting.
05.7505.0, 66092R1, WT6764, FPMM931
Related Parts
Check the matching spider hub when servicing the dual-wheel assembly.
| Use | Part number | Part type |
|---|---|---|
| Hub to suit | AP3321 | 20in TQ five-spoke spider hub |
Compliance and Safety
Inspect both rim seating surfaces and the spider hub before installing the spacer. Replace any band that shows cracking, distortion, corrosion damage or damaged corrugations.
Ensure the spacer seats evenly between the dual rims. Then secure the wheel assembly with the correct rim clamps and fasteners, following the wheel manufacturer’s tightening procedure.
Trailer Applications
Workshops fit corrugated spacer bands between dual demountable rims on compatible 20in spider wheel assemblies. Heavy trailers and trucks use these arrangements where the wheel system requires a separate band to maintain the specified spacing between adjacent rims.
Cross-reference and Suitability
This part cross-references to the following equivalent spacer band numbers:
| 05.7505.0 | 66092R1 | WT6764 |
| FPMM931 |
Why Choose ICS Trailers
Spider wheel spacer bands come in several closely related widths and profiles. The difference between a 4in, 4¼in and 4½in band matters when assembling dual rims. ICS Trailers can help compare your existing spacer measurements and wheel arrangement to identify the correct replacement.
- Check the surrounding spider hub, rim clamps and wheel fasteners when replacing a damaged spacer band.
- Send through the original spacer width, rim size or photos of the wheel assembly if you need help identifying the correct configuration.
Browse more Rims, Wheels & Spacers
Online prices apply to website orders only. In-store pricing may differ.






