Tubeless Alloy Wheel Valve TR554D 60° 72.5mm

Tubeless Alloy Wheel Valve TR554D 60° 72.5mm

$9.00

Tubeless alloy wheel valve TR554D featuring a 60° angled stem, 72.5mm length and nickel-plated brass construction. Designed for compatible American-style Alcoa alloy rims with a 9.7mm valve hole. Clamp-in installation with a specified tightening torque of 5Nm.

Part number 156172.

This field is for validation purposes and should be left unchanged.

Description

Overview

The tubeless alloy wheel valve TR554D is a nickel-plated brass clamp-in tyre valve for American-style Alcoa alloy rims on trucks, buses and heavy trailers. Its 60° angled stem and 72.5mm length provide an inflation connection for compatible wheels with a 9.7mm valve hole.

The nickel-plated finish helps protect against corrosion between the brass valve and aluminium wheel. The clamp-in mounting arrangement provides a secure, serviceable connection for tubeless tyre assemblies.

Features

  • 60° angled stem for compatible alloy wheel valve positions.
  • Nickel-plated brass construction helps resist corrosion.
  • Clamp-in mounting arrangement for tubeless tyres.
  • 9.7mm rim hole compatibility.
  • Manufacturer-specified installation torque of 5Nm.

Specifications and Materials

Product type: Tubeless alloy wheel tyre valve.

Manufacturer: REMA TIP TOP.

Valve type: TR554D.

Valve designation: 75 MS.

Material: Nickel-plated brass.

Length: 72.5mm.

Bend angle: 60°.

Rim hole diameter: 9.7mm.

Installation torque: 5Nm.

Mounting type: Clamp-in.

Wheel application: American-style Alcoa alloy rims.

Vehicle application: Trucks, buses and compatible heavy trailers.

Supplied quantity: 1 valve.

Part number: 156172.

Refer to the official REMA TIP TOP valves and accessories technical guide for valve specifications and wheel applications

Compatibility and Fitment

The TR554D suits American-style Alcoa alloy wheels that use a 9.7mm valve hole and require a 60° angled metal valve.

Check the existing valve’s length, bend angle and mounting arrangement before ordering. Similar truck valves use different stem lengths and angles, which can affect access to the inflation point.

During installation, ensure the valve sealing surfaces are clean and free from damage. Tighten the retaining nut to the specified 5Nm torque.

Related Parts

When servicing tubeless alloy wheels, inspect the valve core, sealing components and valve cap. Replace worn or damaged components to maintain an airtight connection.

Valve extensions may also assist with inflation access on compatible dual-wheel arrangements. Select any extension to suit the installed valve and available wheel clearance.

Compliance and Safety

Inspect the valve hole for corrosion, burrs or damage before fitting the replacement valve. Ensure the valve seats correctly and use a suitable torque wrench during installation.

After fitting the tyre, check the valve assembly for air leaks. Follow the wheel and tyre manufacturer’s inflation procedures and pressure requirements.

Trailer Applications

Tyre workshops use this angled clamp-in valve on compatible aluminium wheels fitted to heavy trucks, buses and trailers. The 60° stem provides an inflation connection where the rim design requires an angled valve rather than a straight stem.

Cross-reference and Suitability

This valve also carries the following manufacturer type designation:

TR 554D

 

Why Choose ICS Trailers

Alloy wheel valves vary in length, bend angle and mounting requirements. The correct valve must match the rim hole and provide adequate clearance for inflation equipment.

ICS Trailers can help compare your existing valve against the required dimensions. Send through the valve markings or photos of the wheel arrangement if you need assistance identifying a replacement.

Browse more Rims, Wheels & Spacers

Online prices apply to website orders only. In-store pricing may differ.