Description

Overview

Rear indicator lamp suits trailer and truck rear lighting where a recessed amber indicator needs a rubber grommet and plug connection. The low profile body sits into the mounting cut-out, so the lamp finishes cleaner than a raised surface mount unit.

Features

• Amber rear indicator function for trailer and truck lighting
• 12-24V multivolt operation for mixed electrical systems
• IP67 rated recessed body with rubber grommet and plug included
• 7 LED lamp with ADR indicator approval

Specifications and Materials

This recessed indicator lamp measures 164mm x 57mm x 18mm and fits into a 171mm x 61mm mounting cut-out. The grommet measures 192mm x 85mm x 25mm.

Part number: 164AM.

The lamp uses a PMMA lens and ABS base. It draws 0.13A on the indicator circuit at 13.8V and carries ADR Indicator 6/00 2a approval.

See the manufacturer technical guide

Compatibility and Fitment

Check the cut-out size, voltage range and rear indicator position before ordering. Horizontally fit the grommet into the panel, run the wire through the back of the lamp, then push the lamp into the grommet.

Related Parts

Check the related service parts below against the lamp setup before ordering.

Compliance and Safety

Confirm the indicator flashes correctly after installation. Also check the grommet seat and cable route, because poor seating or tight wiring can affect the lamp fit behind the panel.

Trailer Applications

Workshops fit recessed amber indicators on trailers, truck bodies, tray bodies and commercial vehicle rear panels. This lamp suits replacement work where the old recessed indicator, grommet or plug has cracked, leaked or failed.

Why Choose ICS Trailers

ICS Trailers supplies trailer lighting parts for repairs, refits and fleet servicing, with practical details to help match the lamp to the job.

Browse more LED Lights