Description

Overview

Stop tail lamp handles rear stop and tail lighting on trailers and truck bodies with a recessed red LED unit. The rubber grommet holds the lamp into the panel cut-out, so the rear body gets a cleaner low profile finish than a raised surface mount lamp.

Features

• Red stop and tail function for rear trailer lighting
• 12-24V multivolt operation for mixed vehicle electrical systems
• IP67 rated recessed body with rubber grommet and plug included
• 7 LED lamp with ADR stop/tail approval

Specifications and Materials

This recessed rear lamp measures 164mm x 57mm x 18mm and fits into a 171mm x 61mm mounting cut-out. The grommet measures 192mm x 85mm x 25mm.

Part number: 164RM.

The lamp uses a PMMA lens and ABS base. It draws 0.30A on stop and 0.02A on tail at 13.8V, with ADR Stop/Tail 49/00 approval.

See the manufacturer technical guide

Compatibility and Fitment

Check the cut-out size, voltage range and rear stop/tail position before ordering. Horizontally fit the grommet into the mounting surface, run the wire through the back of the lamp, then push the lamp into the grommet.

Related Parts

Check the related service parts below against the lamp setup before ordering.

Compliance and Safety

Confirm the stop and tail circuits work correctly after installation. Also check the grommet seat and cable route, because poor seating or tight wiring can affect how the lamp fits behind the panel.

Trailer Applications

Workshops fit recessed red rear lamps on trailers, truck bodies, tray bodies and commercial vehicle rear panels. This unit suits replacement work where the old stop/tail lamp, grommet or plug has cracked, leaked or failed.

Why Choose ICS Trailers

ICS Trailers supplies trailer lighting parts for repairs, refits and fleet servicing, with practical details to help match the lamp to the job.

Browse more LED Lights