Jumbo-S LED Triple Rear Combination Lamp

Allan Davis on 23/06/2026

Jumbo-S LED triple rear combination lamp with stop tail indicator and reverse sections
Jumbo-S LED Triple Rear Combination Lamp - Image 2

Jumbo-S LED Triple Rear Combination Lamp

$325.00

Jumbo-S LED triple combination lamp for trailer stop, rear position, indicator and reverse functions, with 12/24V Multivolt operation, 2m sheathed cable, 23cm² red retro reflectors and mounting bolts supplied for rear lighting repairs and lamp replacements.

Part number 2431.

Quick Quote

SKU: 2431 Category: Tags: , , , , , , , , , , , , , , , , , Brand:
This field is for validation purposes and should be left unchanged.

Description

Overview

Jumbo-S LED triple combination lamp handles stop, rear position, rear direction indicator and reverse lighting in one pre-assembled rear lamp. It suits 12V and 24V trailer electrical systems, so workshops can fit one lamp across mixed fleet setups. The 23cm² red retro reflectors also support rear visibility without adding a separate reflector to the same lamp position.

Features

  • Combines stop, rear position, rear direction indicator and reversing functions.
  • Includes mounting bolts for surface mounting.
  • Pre-wired with 2m of sheathed multi-core cable.
  • Sealed LED construction resists dust, temporary immersion and high-pressure cleaning.

Specifications and Materials

This Jumbo-S LED triple combination lamp uses Multivolt electronics for 12V and 24V systems. Power consumption is 5W stop, 1W rear position, 4W rear direction indicator and 4W reversing. The housing supports horizontal or vertical mounting and carries reverse polarity plus transient voltage spike protection.

Part number: 2431.

Use the HELLA Jumbo and Designline LED lamps information for manufacturer series details

Compatibility and Fitment

Match the lamp function, mounting direction, cable route and trailer voltage before ordering. This version suits standard Jumbo-S rear lamp replacement where a stop, rear position, indicator and reverse lamp assembly is required. If the vehicle needs LED indicator failure monitoring on a 24V setup, choose the HCS version instead.

Related Parts

Check the related service parts below against the trailer setup before ordering.

Use Part number Part type
Replacement component 2361 Stop and rear position module
Replacement component 2161 Rear direction indicator module
Replacement component 1461 Reversing module
Related version 2431-CS HCS version
Related version 2431DTCS DT connector HCS version
Related version 2431RET Retail pack version

 

Compliance and Safety

Confirm the lamp position against the trailer layout before fitting. Mount the lamp on a flat surface, keep the cable away from sharp edges and seal electrical joins properly. Also, do not use the reversing lamp as a continuous work light because reverse lamps need normal reversing-duty operation.

Trailer Applications

Trailer builders, transport fleets and repair workshops fit this lamp to heavy trailers, truck bodies and commercial equipment that need a full-width Jumbo-S rear combination lamp. It works well when the job calls for one rear assembly with stop, tail, indicator, reverse and reflector functions.

Why Choose ICS Trailers

ICS Trailers can help match rear LED lamps by voltage, lamp family, function layout and replacement module options. Browse more trailer lighting parts in our LED Lights

Online prices apply to website orders only. In-store pricing may differ.

Related products