Description

Overview

The BPW M16 x 8mm nylon tube fitting connects 8mm outside diameter nylon tube to a compatible M16 threaded port in trailer pneumatic plumbing. Its straight layout keeps the tube aligned with the port, while the hexagonal body and locknut provide spanner access for controlled positioning. Both the metric thread and tube size must match the existing connection.

Features

• Straight tube-to-thread configuration for an in-line air connection.
• M16 male threaded end for a compatible metric port.
• Compression nut connection for 8mm nylon tube.
• Hexagonal body and locknut provide installation access.

Specifications and Materials

Product type: straight pneumatic tube fitting. Tube connection: 8mm outside diameter nylon tube. Port connection: M16 male thread. The assembled fitting has a metallic body, threaded stem, locknut and tube compression nut. Part number: 02.4313.06.00.

Service guidance is available in the BPW air suspension workshop manual

Compatibility and Fitment

Match the M16 port thread, 8mm tube outside diameter and straight layout before ordering. The main mismatch risk is choosing the correct tube size with the wrong thread form, pitch or port depth. Cut the nylon tube square, remove burrs and seat it fully before tightening the compression nut. The BPW M16 x 8mm nylon tube fitting also needs clearance for a spanner on the body and locknut.

0243130600 M8NYLON

Compliance and Safety

Depressurise the pneumatic system before removing the old fitting. Inspect the mating port and tube for damaged threads, scoring, flattening or contamination. Replace any tube section that cannot form a clean connection. After installation, repressurise the system and check the joint for leakage, movement and firm seating. Avoid over-tightening because it can damage the port or distort the tube connection.

Trailer Applications

Workshops fit this straight connection during repairs to BPW trailer air suspension plumbing, pneumatic control lines and compatible circuits that run 8mm nylon tube into an M16 port. Its in-line form suits positions where the tube approaches the component directly instead of turning through an elbow. The compact shape also helps where nearby brackets or components limit the available tube path.

Why Choose ICS Trailers

Thread and tube size are critical on compact pneumatic fittings. If the old part is difficult to identify, send a clear photo of the fitting, port and tube markings together with the measured tube outside diameter. ICS Trailers supplies air fittings and pneumatic service components for trailer repairs and fleet air-system servicing.

Browse more Air Fittings