Description

Overview

Amber emergency strobe lamp adds compact warning visibility to trailers, service vehicles and workshop bodies. The low profile body keeps the lamp close to the mounting surface, while the clear inactive lens gives the unit a neat finish when not flashing.

Features

• Amber emergency strobe lamp with 11 selectable flash patterns.
• 3 x 3 Watt LEDs in a low profile 89mm body.
• 3M tape and screw fitting for secure surface mounting.
• Synchronising wire for simultaneous or alternating flash setups.

Specifications and Materials

This lamp runs on multivolt 12/24V electrical systems and uses a 25cm cable. It measures 89mm x 30mm x 8mm and carries SAE J595 Class 1 W-1 16DOT approval across the listed approved flash patterns.

Part number: 120033AM.

See the manufacturer technical guide for 120033 Series electrical and fitting details

Compatibility and Fitment

Check the mounting surface, cable path, voltage and warning lamp requirements before fitting. Mount the lamp horizontally or vertically on a flat surface, then use the supplied tape and screws to hold the body firmly in place.

Related Parts

Check the related colour versions below against the vehicle setup before ordering.

Compliance and Safety

Use the lamp only where amber warning lighting suits the vehicle, trailer or site requirement. Also test the selected pattern after wiring, because synchronised lamps need the brown wire set correctly before final use.

Trailer Applications

Workshops fit an amber emergency strobe lamp to service trailers, traffic control trailers, plant support vehicles and maintenance bodies. When several lamps run together, the synchronising wire lets the installer set matched or alternating warning flashes.

Why Choose ICS Trailers

Choose this lamp when the job needs a compact amber warning unit with a low profile body, selectable flash patterns and hard-wired 12/24V operation.

Browse more LED Lights