Description

Overview

Chain Grab Hook 13mm Grade 70 is a clevis grab hook that captures a transport chain link while you tension a load restraint setup. It suits 13mm lashing chain, so you can take up slack and keep the chain seated where you need it. Because the hook grips a link, it helps when you want a compact end fitting.

Features

• Clevis grab design to capture a chain link during tensioning
• Suits 13mm load restraint transport chain for heavy duty tie-downs
• Rated to 9000kg lashing capacity for transport restraint use
• Grade 70 fitting with a yellow zinc di-chromate finish

Specifications and Materials

Part number: CA4753.
This Chain Grab Hook 13mm Grade 70 suits Grade 70 transport chain and uses a clevis connection for chain end fitment. The yellow zinc di-chromate coating helps slow surface corrosion in harsh conditions. Read the NZ Transport Agency load securing equipment guidance for restraint selection and inspection basics.

Compatibility and Fitment

Use this Chain Grab Hook 13mm Grade 70 with 13mm Grade 70 load restraint chain and tensioning hardware rated at or above the system capacity. If you use load binders or turnbuckles, match their rating to the chain and hook, otherwise the weakest component limits the assembly.

Compliance and Safety

Follow the load restraint requirements that apply to your vehicle and route because restraint methods vary by load type. Inspect the hook and clevis pin before use, and replace it if you see spreading, cracking, heavy wear or distortion. Do not weld, heat, grind, or modify the hook because that can reduce strength. Grab hooks can change how a chain carries load, so confirm your method and never exceed the rated lashing capacity.

Trailer Applications

• Plant and machinery tie-downs on flat top and drop deck trailers
• General load restraint on semi trailers, tag trailers and rigid trailers
• Securing pallets, steel, timber and equipment where chain restraint suits
• Transport chain assemblies used with compatible binders and anchor points

Cross-reference and Suitability

No confirmed interchangeable part numbers were identified for this Chain Grab Hook 13mm Grade 70. Instead, match by chain size, grade and lashing capacity, then check the hook seats correctly on the chain link.

Why Choose ICS Trailers

ICS Trailers stocks load restraint and trailer hardware for transport work, so you can keep your gear consistent across the fleet. If you are unsure, share your chain size and setup and we can help you pick compatible components.
Browse Hardware at ICS Trailers in the Browse Hardware at ICS Trailers category for related load restraint gear.