Description

Overview

The Transport Chain Kit 13mm x 6m 9000kg LC gives you a tough restraint option for heavy loads on trailers and plant floats. It uses a 6m length of 13mm transport chain with clevis grab hooks, so you can tension and secure loads without relying on webbing straps. Because the kit stores in a reusable bucket, you can keep the chain protected and ready for the next job.

Features

• 13mm transport chain set up as a ready to use kit
• 6m length for common direct restraint tie downs
• Clevis grab hooks at each end for fast connection to anchor points
• Protective plated finish to help resist weather exposure

Specifications and Materials

Part number: CA4751.

• Chain size and length: 13mm x 6m
• Rated lashing capacity: 9000kg LC
• End fittings: clevis grab hooks at each end
• Packaging: reusable bucket

See NZ Transport Agency load securing equipment guidance for general chain and hook safety notes.

Compatibility and Fitment

This Transport Chain Kit 13mm x 6m 9000kg LC suits load restraint work where you need chain, not webbing, such as steel, machinery, or rigid freight. Before you buy, check that your trailer has rated lashing points or chain slots that suit 13mm chain hardware. Also confirm you have enough anchor spacing to run direct restraint angles without twisting the chain or side loading the hooks.

Compliance and Safety

This chain kit is listed as complying with AS/NZS 4344 for transport chain and components. However, you should still verify the markings on the chain and fittings, because compliance depends on the exact chain grade and the matched components. Inspect links, hooks, and clevis pins before every use, then remove any restraint gear that shows cracks, distortion, heavy wear, or bent hardware. If your restraint method causes sharp bends at the hook, follow current load restraint guidance and the product markings, because some hook styles can reduce effective capacity in certain setups.

Trailer Applications

Use this kit on flat top trailers, drop decks, plant floats, and tipper bodies when you need a durable restraint that tolerates heat, abrasion, and rough freight edges. The Transport Chain Kit 13mm x 6m 9000kg LC also suits load binders when you need consistent tension. It also works well for securing equipment where you need short chain tails to binders, because the chain resists cutting where straps can fail. When you carry delicate freight, add edge protection or sleeves so the chain does not damage the load, and then set your tie down angles to keep the load stable under braking and cornering.

Cross-reference and Suitability

No confirmed cross references were found for this part.

Why Choose ICS Trailers

ICS Trailers stocks load restraint and trailer hardware that suits real workshop and fleet use, so you can keep compliant restraint gear on hand. If you want help selecting the right chain size, binder style, or protection accessories, contact us and we will help you match the kit to your trailer and your load profile.

Browse Hardware at ICS Trailers