Straight 1/8 NPT x 1/4in Nylon Tube Fitting
Straight 1/8 NPT x 1/4in Nylon Tube Fitting
$5.00
Straight brass fitting connects 1/4in nylon air-brake tube to a 1/8 NPT female port and includes the compression nut and preassembled tube insert.
Part number 36-003-0402.
Description
Overview
The 1/8 NPT x 1/4in nylon tube fitting joins 1/4in outside-diameter nylon air-brake tube to a female 1/8 NPT port. Its straight brass body keeps the connection compact, while pre-applied thread sealant prepares the male pipe end for installation.
This connector suits repairs where a small nylon line enters a threaded valve, manifold or pneumatic component. It includes the compression nut and preassembled tube insert required at the tube connection.
Features
- Straight connector for 1/4in nylon tube
- 1/8 NPT male pipe connection
- Brass body with installation hexes
- Includes compression nut and tube insert
Specifications and Materials
Configuration: straight compression tube-to-male-thread connector.
Tube connection: 1/4in outside-diameter nylon tube.
Pipe connection: 1/8 NPT male thread with pre-applied sealant.
Part number: 36-003-0402.
Review the Danfoss brass air-brake fitting guide
Compatibility and Fitment
Match the tube outside diameter and pipe thread before ordering. The main mismatch risk is choosing a similar connector with a 1/4 NPT thread or a metric tube connection. For the 1/8 NPT x 1/4in nylon tube fitting, cut the tube square, remove burrs and push it fully into the body before tightening the nut.
These cross-references show where this part replaces the part numbers and applications listed. Some installations may need minor changes. GP68CDOT0402, 1468X4, 68NTA-4-2, 68NTA42
Related Parts
Check the related service parts below against the trailer setup before ordering.
| Use | Part number | Part type |
|---|---|---|
| Replacement component | ABD1484X4 | 1/4in tube insert |
| Replacement component | ABD1461X4 | 1/4in tube nut |
| Replacement component | ABD1460X4 | 1/4in tube olive |
Compliance and Safety
Depressurise the air system before installation. Inspect the nylon tube for scoring, flattening or heat damage, then replace any damaged section. Secure the fitting with the correct spanners, restore pressure and check both joints for leakage.
Trailer Applications
Workshops use this fitting on trailer air-brake, air-suspension and auxiliary pneumatic circuits. Typical connection points include valves, gauges, manifolds and controls with a matching female port.
Cross-reference and Suitability
This part cross-references to or suits the following equivalent part numbers and compatible alternatives:
| GP68CDOT0402 | 1468X4 | 68NTA-4-2 |
| 68NTA42 |
Why Choose ICS Trailers
ICS Trailers supplies nylon air line fittings, tube, inserts, nuts and olives for truck and trailer repairs. If the old connector is difficult to identify, send photos with the tube outside diameter and port thread measurement.
Browse more Air Fittings
Online prices apply to website orders only. In-store pricing may differ.








