Description

Overview

The SAF Intradisc hub cap closes the grease-filled wheel end on matching disc-brake trailer axles. This matt-finish assembly measures 200mm OD, 196mm ID and 72mm deep, and it is supplied with the hub-cap O-ring and protection plug used with the assembly.

Features

• Grease-hub configuration for matching SAF Intradisc wheel ends.
• Supplied with a 182 x 4mm hub-cap O-ring and protection plug.
• Matt-finish assembly for the corresponding axle setup.

Specifications and Materials

Hub type: grease filled. Outside diameter: 200mm. Inside diameter: 196mm. Depth: 72mm. Supplied contents: hub-cap O-ring and protection plug.

Part number: AP4163.

See the SAF INTRADISC axle range for matching axle family details

Compatibility and Fitment

Match the removed cap by grease-hub application, 200mm outside diameter, 196mm inside diameter, 72mm depth and matt finish. A chromed assembly exists for the same wheel-end family, so finish and original markings should also be checked.

The following cross-reference numbers identify verified equivalent or replacement parts for this exact application. Confirm the selection-critical fitment details against the part being replaced before fitting.

3304009200.

Related Parts

Check the related service parts below against the trailer setup before ordering.

Compliance and Safety

Inspect the cap seating face and O-ring groove before refitting. Replace a flattened, cut or damaged O-ring, and make sure the protection plug is seated correctly before returning the wheel end to service.

Trailer Applications

The SAF Intradisc hub cap suits matching SK RZ 9019 disc-brake axle wheel ends where this larger grease-filled cap assembly is fitted.

Cross-reference and Suitability

This part cross-references to the following verified equivalent or replacement part numbers:

Why Choose ICS Trailers

This cap is easy to confuse with nearby SAF versions because the wheel-end family includes different finishes and cap arrangements. Compare the 200mm OD, 196mm ID, 72mm depth and matt finish with the removed part. ICS Trailers can also use old markings, photos and axle details to help narrow down the correct wheel-end component.

• Identify the matching O-ring and protection plug when servicing the cap assembly.
• Compare surrounding SAF hub parts when the old cap is damaged or markings are difficult to read.

Browse more Axle Parts