Description

Overview

The 3/4 hose barb elbow turns a hose connection through 90° while joining 3/4″ inside-diameter hose to a 3/4″ male NPT port. Its compact brass body routes air, water, fuel or compatible fluid lines where a straight fitting would direct the hose into nearby equipment or structure.

Features

• 90° elbow layout for changing hose direction in confined plumbing runs.
• 3/4″ multi-rib hose barb for matching 3/4″ ID flexible hose.
• 3/4″ male NPT connection for a matching female tapered pipe port.
• Square wrenching body for controlled installation.

Specifications and Materials

This one-piece brass fitting combines a 3/4″ hose barb, a 3/4″ male NPT thread and a right-angle body. The hose end requires a correctly sized hose and suitable clamp, while the tapered thread requires compatible thread sealant.

Part number: 06-206-1212.

See the manufacturer hose barb catalogue

Compatibility and Fitment

Match the hose inside diameter, male thread size, NPT thread form and elbow clearance before ordering. The main mismatch risk is confusing 3/4″ NPT with a similar-looking BSP thread, or matching the barb to the hose outside diameter instead of its inside diameter. The 3/4 hose barb elbow should seat without cross-threading and leave enough straight hose for a clamp behind the final barb.

These cross-references show where this part replaces the part numbers and applications listed. Some installations may need minor changes. GP-579-01210, GP57901210

Compliance and Safety

Depressurise and drain the line before removal. Inspect the hose end for hardening, splits or distortion, then use a clamp and sealant compatible with the system pressure, temperature and fluid. Support the hose so vibration does not load the elbow, and leak-test the connection before returning the system to service.

Trailer Applications

Workshops fit this elbow in truck, trailer and equipment plumbing where a 3/4″ hose must turn into a 3/4″ NPT port. Applications include air, water, fuel and other compatible fluid lines within the hose and fitting specifications.

Cross-reference and Suitability

This part cross-references to or suits the following equivalent part numbers and compatible alternatives:

Why Choose ICS Trailers

ICS Trailers supplies hose, clamps, thread sealants and air fittings for heavy vehicle and trailer repairs. If the old fitting is difficult to identify, send photos and measurements of the hose ID, thread outside diameter, thread pitch and available elbow clearance.

Browse more Air Fittings