Description

Overview

Fuwa K-Hitch black screw on hub cap suits TP axle parallel bearing wheel end setups with spoke and stud hubs. This cap closes off the hub end and helps protect the wheel end assembly, so the screw-on type and hub measurements must match before fitting.

Features

• Black screw-on hub cap for Fuwa K-Hitch axle applications
• Suits TP axles with parallel bearing wheel end setup
• Designed for spoke and stud hub applications
• 153mm internal diameter, 187mm outside diameter and 80mm depth

Specifications and Materials

This hub cap uses a screw-on fitment and suits spoke and stud hubs. Match the 153mm internal diameter, 187mm outside diameter and 80mm depth against the removed cap before ordering.

Part number: KH800205B.

Read the official Fuwa K-Hitch axle parts guide

Compatibility and Fitment

Check the axle type, bearing setup, hub style and cap thread before fitting. The main mismatch risk is ordering a screw-on cap for a hub that uses a bolt-on cap, or choosing a cap with the wrong diameter for the hub end.

These cross-references show where this part replaces the part numbers and applications listed. Some installations may need minor changes. AP4270

Related Parts

Check the related service parts below against the trailer setup before ordering.

Compliance and Safety

Inspect the cap thread, O-ring condition and hub sealing face before refitting. Replace damaged sealing components and confirm the cap seats evenly, as a poor seal can allow contamination into the wheel end.

Trailer Applications

Workshops use this type of cap during axle, hub and wheel end servicing on heavy trailer running gear. It suits trailer wheel end repairs where the existing Fuwa K-Hitch cap is a black screw-on style rather than a bolt-on hub cap.

Cross-reference and Suitability

This part cross-references to or suits the following equivalent part numbers and compatible alternatives:

Why Choose ICS Trailers

ICS Trailers supplies axle and wheel end parts for trailer repairs, hub servicing and fleet maintenance. If you are unsure on the correct hub cap, send through the old cap markings, thread style, hub photos and cap measurements so the fitment can be checked before ordering.

Browse more Axle Parts