Description

Overview

Heavy duty equaliser pin restores the main pivot location through Freighter TAA mechanical suspension equaliser hardware.

The 345mm overall length, 38mm shaft diameter and 1-1/2″ UNF thread help workshops match the removed pin before rebuilding the suspension assembly.

Features

• Heavy duty equaliser pin for Freighter TAA suspension service.
• Suits TAA35, TAA363, TAA37 and TAA40 suspension applications.
• 345mm overall length with 38mm shaft diameter.
• 1-1/2″ UNF thread for matching the correct nut and washer setup.

Specifications and Materials

This heavy duty equaliser pin suits Freighter TAA mechanical suspension equaliser positions where the shaft length, diameter and thread match the existing hardware.

The pin measures 345mm overall length with a 38mm shaft diameter and 1-1/2″ UNF thread.

Part number: SP1225.

Check the nut and cast washer at the same time, because worn equaliser hardware can mark the pin or affect the suspension pivot fit.

NHVR steering and suspension inspection guide

Compatibility and Fitment

Match this pin to the trailer suspension model, overall length, shaft diameter, thread size and equaliser hardware before ordering.

Use it for Freighter TAA35, TAA363, TAA37 and TAA40 setups that run the 345mm by 38mm heavy duty pin.

These cross-references show where this part replaces the part numbers and applications listed. Some installations may need minor changes. FL81.2054, FL812054, BP1205S, 203-02414, 20302414, 09.1205.1, 0912051, WT1205S, FP1205S, IT1205S, T03-1225, T031225, FL80.2055, FL802055, 09.1205.0, 0912050

Related Parts

Check the related service parts below against the trailer setup before ordering.

Compliance and Safety

Inspect the equaliser casting, nut, washer and surrounding hanger area before reassembly, then replace damaged hardware rather than reusing worn parts.

Also tighten the assembly to the suspension maker’s procedure and recheck the pivot area after service.

Trailer Applications

Workshops use this heavy duty equaliser pin during Freighter TAA mechanical suspension repairs, especially when the original pin shows wear, thread damage or scoring.

It suits trailer suspension work where the equaliser pivot hardware needs to be matched as a service set.

Cross-reference and Suitability

This part cross-references to or suits the following equivalent part numbers and compatible alternatives:

Why Choose ICS Trailers

ICS Trailers can help match suspension pins to the equaliser, washer and nut setup already fitted to the trailer. If the pin has worn badly, check the casting and washer before ordering.

Find more trailer suspension parts in Suspension