Description

Overview

10ft taper suspension rocker is a long load-sharing equaliser used in tri-axle mechanical spring suspension for Fuwa, TMC and York setups. As the suspension moves, the rocker helps transfer load between axles and keeps the group working evenly across the spread. When the pivot area wears or the rocker starts moving off-centre, bush life can drop, so accurate matching matters before rebuild work begins.

Features

• Suits Fuwa, TMC and York mechanical suspension layouts
• Commonly used in 10’1″ tri-axle spread applications
• Guide dimensions of A 630mm, B 750mm and C 110mm for part matching
• Uses tapered equaliser bushes and matching rocker pin hardware

Specifications and Materials

This 10ft taper suspension rocker is a cast equaliser-style suspension part for mechanical trailer spring setups. It matches 10’1″ spread applications in Fuwa, TMC and York-style suspensions, so buyers should confirm the guide dimensions and bush style against the removed part before ordering. Part number: SP1183.

See the K-Hitch mechanical suspension parts guide for general rocker and bush layout information

Compatibility and Fitment

Before ordering, match the suspension family, rocker length, centre width and tapered bush arrangement against the part removed from the trailer. This cross-reference listing means this part is a suitable replacement for the part numbers and applications shown. Some changes in installation may be required. 099369, 323110, 900010, CPB69654, FL82.2115, FL822115, KH690010, SXT-09-9369, SXT099369, GE7621

Compliance and Safety

Inspect the centre hanger, bushes, rocker pin and retaining hardware at the same time, because wear across those parts often shows up together. If the spread, rocker profile or pivot setup does not match the original suspension, stop and recheck before fitting the part.

Trailer Applications

This 10ft taper suspension rocker is used on 10’1″ tri-axle mechanical suspension where the equaliser balances axle movement across the group. It suits older Fuwa, TMC and York-style trailer suspension layouts, so it is relevant during suspension rebuilds, hanger repairs and major equaliser change-outs. It also helps restore proper movement when the existing rocker has worn through the bushes or is no longer sitting correctly in the hanger.

Cross-reference and Suitability

This part cross-references to or suits the following equivalent part numbers and compatible alternatives:

Why Choose ICS Trailers

ICS Trailers also carries the bushes and pin hardware used around this rocker, so the pivot area can be refreshed while the suspension is already apart.

Browse Suspension parts at ICS Trailers for related mechanical suspension components