Description

Overview

Zebra Left Hand Rear Reflective Sticker 600x150mm is a long-life rear marker decal that helps define the left rear edge of a trailer. It uses a high-visibility red and yellow zebra pattern, so other road users can judge position and width sooner in low light. Because it applies directly to a suitable surface, it offers a simpler alternative to rigid plates when you want a flush finish.

This style suits repairs as well as new builds, and it works best when the rear panel is clean, flat, and free of loose paint. If you are replacing a worn marker, matching the correct left-hand orientation matters, otherwise the zebra bands may face the wrong way.

Features

• Long life vinyl sticker format designed for outdoor exposure
• High resolution print and UV fade protection to keep the pattern readable
• Reflective performance marked to AS 4001.1 Class 1A
• Simple peel-and-apply install on a prepared surface

Specifications and Materials

Size: 600 x 150mm.

Colour: red and yellow zebra pattern.

Material: long life vinyl sticker.

Reflective class marking: AS 4001.1 Class 1A.

Stated durability: will last multiple years in many outdoor environments (7 years+).

Part number: CA7287.

See Transport WA rear marking plates guidance for a government overview of rear marking plate requirements

Compatibility and Fitment

Apply the sticker to the rear left-hand side on a near-vertical surface where it stays visible and unobstructed. Also remove wax, oil, and road film first, because contamination can cause edge lift over time. If the panel has rivets, seams, or heavy corrugations, position the sticker so the reflective face stays smooth and continuous. Zebra Left Hand Rear Reflective Sticker 600x150mm works best when you press it down evenly from the centre out, and then re-check the edges after the first wash cycle.

Compliance and Safety

Rear marking plate requirements vary by jurisdiction and vehicle mass, so confirm the rule set that applies to your combination. For example, Transport WA states that vehicles over 12,000kg GVM and trailers over 10,000kg GTM must be fitted with retro-reflective rear marking plates. Even when your vehicle sits outside mandatory thresholds, consistent rear marking can still improve night-time conspicuity.

Trailer Applications

This sticker suits heavy trailer combinations that use zebra rear markers, including general freight, flat tops, and semi-trailers with suitable rear panels. It can also suit light trailers where you want a durable left-side marker, provided you follow the applicable standards for your state. If you are standardising fleet spares, Zebra Left Hand Rear Reflective Sticker 600x150mm helps keep replacement installs consistent in size and orientation.

Why Choose ICS Trailers

ICS Trailers supplies trailer-focused safety signage, so you can match size, side, and reflective class with less guesswork. You also get support for selecting the right marker style for your rear panel, which helps reduce rework in the workshop. Because these items are common wear replacements, keeping the correct format on hand can minimise downtime.

Browse Signs and Safety parts at ICS Trailers