Load Restraint Ratchet Tie Down Strap 25mm x 5m
Load Restraint Ratchet Tie Down Strap 25mm x 5m
$10.00
Ratchet tie down strap for light load restraint on trailers, suited to securing toolboxes, tarps and loose gear with controlled tension from a hand ratchet, plus 25mm x 5m webbing, 500kg capacity, protective sleeve, and hook and keeper ends, and AS/NZS 4380 compliance.
Part number CA4845.
Description
Overview
Load Restraint Ratchet Strap 25mm x 5m 500kg provides a simple way to tension and secure lighter cargo on trailers when you need a rated tie down. It suits general restraint tasks where a wider strap is unnecessary, and it gives you controlled take-up with a hand ratchet. Because the strap is 5m long, it also works well on box trailers, utes and light plant moves where you still want proper restraint rather than rope. Brand may vary depending on availability.
Features
- Hand ratchet tensioning for quick and repeatable tightening
- Hook and keeper ends so the strap stays located during use
- Protective sleeve to help reduce abrasion on the webbing
- Designed for reliable everyday load restraint on light duties
Specifications and Materials
- Strap size: 25mm x 5m
- Capacity: 500kg
- Webbing: nylon and polyester construction
- Assembly: ratchet with webbing strap, hook and keeper at each end
Part number: CA4845.
See Victorian Government guidance on securing loads for general restraint selection and safe-use guidance.
Compatibility and Fitment
This strap is intended for tie-down load restraint on trailers and light transport tasks where you can anchor to suitable rated points. For best results, route the webbing over the load, keep the ratchet clear of sharp edges, and position the protective sleeve where the strap contacts corners. After you set tension, then re-check it after a short distance because loads can settle.
This cross-reference listing means this part is a suitable replacement for the part numbers and applications shown. Some changes in installation may be required. MLR0008, RT-TIE0.5T5M, RTTIE05T5M
Compliance and Safety
This Load Restraint Ratchet Strap 25mm x 5m 500kg complies with AS/NZS 4380 for transport webbing and components as stated by the supplier. Always inspect the strap, stitching, ratchet and hooks before every use because damage can reduce the rated capacity. Do not tie knots in the webbing, and retire the strap if you see cuts, melted fibres or bent hardware. Use it for restraint only, not for lifting.
Trailer Applications
Use the Load Restraint Ratchet Strap 25mm x 5m 500kg to secure smaller items such as toolboxes, light palletised goods, tarps, lawn equipment and loose gear when you have appropriate anchor points. It also works well for bundling awkward loads so they cannot shift during transport, while the protective sleeve helps when the strap runs across contact points.
Cross-reference and Suitability
This part cross-references to or suits the following equivalent part numbers and compatible alternatives:
| MLR0008 | RT-TIE0.5T5M | RTTIE05T5M |
Why Choose ICS Trailers
- Trailer-focused product range for workshop and fleet needs
- Clear online ordering and straightforward product information
- Local support from a parts team that understands heavy transport
- Fast access to related restraint and trailer consumables
Browse related load restraint gear in Browse Accessories & Consumables at ICS Trailers for more options.
Online prices apply to website orders only. In-store pricing may differ.






