Description

Overview

The K-Hitch M22x1.5 wheel nut secures heavy trailer wheels to matching threaded studs. Its 32mm across-flats hex suits standard wheel-nut tooling. Replace nuts with damaged threads, rounded flats or seating surfaces before returning the wheel end to service.

Features

• M22 × 1.5 metric thread for matching wheel studs.
• 32mm across-flats hex for standard wheel-nut tooling.
• 30mm overall length for standard-length applications.
• Individual wheel nut for replacement or wheel-end servicing.

Specifications and Materials

• Thread: M22 × 1.5mm.
• Hex size: 32mm across flats (A/F).
• Overall length: 30mm.
• Supply: one wheel retaining nut.

Part number: KH800096.

For the wheel-end parts arrangement, see the K-Hitch axle and hub parts guide.

Compatibility and Fitment

Match the M22 × 1.5 stud, 32mm hex and original nut seating before installation. Selected K-Hitch 10-stud wheels use 285mm or 335mm PCD, but bolt circle alone does not establish nut fit. Later KF75 axle builds can use M24 hardware. Therefore, check the axle build and stud thread, especially when replacing mixed-age fleet components.

The following cross-reference numbers identify verified equivalent or replacement parts for this exact application. Confirm the selection-critical fitment details against the part being replaced before fitting.

H34-0301

Related Parts

Match the wheel stud, nut length and indicator size to the existing wheel-end arrangement.

Compliance and Safety

Inspect wheel studs for corrosion, damage and thread stretch before fitting. Tighten in the axle manufacturer’s specified sequence and torque, then recheck at the required interval. A 32mm socket fit alone does not establish thread or seat compatibility.

Trailer Applications

Workshops use the K-Hitch M22x1.5 wheel nut for suitable trailer wheel changes, hub repairs and wheel-end fastener replacements. Its standard-length profile differs from deep-nut options used with certain longer studs.

Cross-reference and Suitability

This part cross-references to the following verified equivalent or replacement part numbers:

Why Choose ICS Trailers

Wheel nuts can share the same hex size while using different thread pitches, lengths or seating arrangements. ICS Trailers can help compare the original nut, wheel stud measurements, hub details and axle identification before a replacement is selected. This reduces the risk of installing the wrong fastening hardware after a wheel-end repair.

• Check short and long stud options against the fitted hub and rim.
• Pair the 32mm hex with the correct visual wheel-nut indicator where required.

Browse more Rims, Wheels & Spacers