Description

Overview

The bottom roller plate supports the lower roller position on compatible TODCO truck and trailer roll-up doors. This right-hand assembly keeps the lower corner hardware secured and aligned as the door travels through its side tracks.

One version suits all three listed door thicknesses, covering 3/4in, 1 1/8in and 2 1/2in panels. Handing remains critical because the right-hand and left-hand assemblies are not interchangeable.

Features

• Right-hand lower roller plate configuration
• Suits 3/4in, 1 1/8in and 2 1/2in roll-up doors
• Mounts at the lower corner of the door assembly
• Supplied as one complete right-hand plate assembly

Specifications and Materials

Product type: roll-up door lower roller plate assembly.

Handing: right-hand.

Compatible panel thicknesses: 3/4in, 1 1/8in and 2 1/2in.

Application family: TODCO wide-slat truck and trailer doors.

Part number: CV3584RH.

See the official TODCO replacement parts overview

Compatibility and Fitment

Confirm the existing part is fitted to the right-hand lower corner and compare the mounting-hole pattern, roller position and door thickness before ordering. The main mismatch risk is choosing the left-hand plate or assuming that visually similar bottom fixtures share the same mounting arrangement.

Check the bottom roller plate against the complete door hardware, not only the panel thickness. Inspect the roller stem, track clearance, lower panel edge and adjoining fasteners while the assembly is accessible.

Related Parts

Check the related service parts below against the trailer setup before ordering.

Compliance and Safety

Secure the door against movement before removing lower-corner hardware. Inspect the roller, fasteners, cable connection and surrounding panel for wear, cracking or distortion, then confirm the replacement moves freely in the track without binding. Repairs involving loaded lift cables or counterbalance components should be completed by a suitably experienced technician.

Trailer Applications

Workshops fit this assembly to rear or side roll-up doors on freight bodies, vans and trailers using compatible TODCO hardware. It replaces damaged, bent or worn right-hand lower hardware that can allow the roller to move out of alignment or place extra load on the track and adjoining door components.

Why Choose ICS Trailers

Right-hand and left-hand door hardware can be difficult to identify once removed. Send the door serial number, panel thickness and clear photos of both lower corners if the required side needs checking.

Browse more Container, Van & Tipper