Description

Overview

The 3/8 hose barb joiner connects two lengths of flexible hose with the same 3/8″ internal diameter. Its straight, double-ended body provides a compact inline repair or extension point without adding threaded adaptors. Multiple barbs on each end grip the hose internally while the centre section separates the two hose ends during assembly.

Features

• Straight barb-to-barb union for joining equal-size hose
• 3/8″ barb size matches 3/8″ hose internal diameter
• Brass construction suits general pneumatic and fluid-transfer work
• One-piece body has no threaded connection or moving components

Specifications and Materials

Configuration: straight hose barb union.

Connections: 3/8″ hose barb at both ends.

Material: brass.

Part number: 06-007-06.

Review the manufacturer hose barb union specifications when comparing hose size and connection style

Compatibility and Fitment

Match the barb size to the hose internal diameter, not the hose outside diameter. The common ordering mistake is choosing a 3/8″ fitting for hose that measures roughly 3/8″ across the outside but has a smaller bore. Cut both hose ends square, push each end fully across the barbed section and secure them with the clamp or ferrule specified for the hose and operating conditions.

These cross-references show where this part replaces the part numbers and applications listed. Some installations may need minor changes. GP-574-06, GP57406

Compliance and Safety

Depressurise the line before cutting or disconnecting hose. Inspect the hose for hardening, cracks, swelling or damage around the old connection because a new joiner will not correct a failing hose wall. After assembly, pressure-test the joint and check both ends for leakage or movement. Confirm the hose, clamps and fitting type suit the system pressure, fluid and temperature before service.

Trailer Applications

A 3/8 hose barb joiner suits inline hose repairs and extensions in truck, trailer and workshop pneumatic systems that use compatible flexible hose. It may also suit general air, fuel or water hose applications where the hose material and retaining method match the fluid and operating conditions. Do not substitute this barb union for a threaded, push-to-connect or compression fitting.

Cross-reference and Suitability

This part cross-references to or suits the following equivalent part numbers and compatible alternatives:

Why Choose ICS Trailers

ICS Trailers supplies hose fittings, clamps, pneumatic connectors and air line components for truck and trailer repairs. When replacing an unknown joiner, compare the hose bore, barb profile and overall connection style before ordering.

Browse more Air Fittings