Description

Overview

Red rear end outline marker lamp gives trailers and commercial vehicles a low profile red marker for rear outline lighting. It replaces older globe type marker lamps with a sealed LED unit, so the rear body edge stays easier to identify in poor light and wet conditions.

Features

• Multivolt 12-24V operation suits mixed trailer and vehicle fleets
• IP67 rated body helps keep dust and water out of the lamp housing
• 4 LED layout with low current draw for efficient marker lighting
• Surface mount retrofit design for replacing globe type marker lamps

Specifications and Materials

This red rear end outline marker carries a red lens, 4 LEDs and a 30cm cable. It draws 0.03A at 13.8V and 0.03A at 28V, so it suits 12V and 24V vehicle electrical systems.

Part number: 69RM.

The lamp uses PMMA lens material and an ABS base, with ECE Rear End 02 RM1 E9 23750 and CTA 49/00 CTA-060080 approval details for the rear end outline marker function.

See the manufacturer technical guide

Compatibility and Fitment

Match this lamp to the rear outline marker position, voltage system and mounting layout before ordering. Mount it horizontally on a flat surface, then run the cable through the fixing surface so the wiring stays protected behind the lamp.

Compliance and Safety

Check the red rear end outline marker location, cable routing and fasteners before road use. Also inspect the sealing face during installation, because dirt behind the housing can affect how cleanly the lamp sits against the body panel.

Trailer Applications

Workshops fit rear outline markers on trailers, rigid bodies, caravans and commercial vehicles where the rear edge needs a clear red marker. This lamp suits replacement work where the old globe type unit has cracked, leaked or stopped working.

Why Choose ICS Trailers

ICS Trailers supplies lighting parts for trailer repair, fleet servicing and body hardware replacement, with practical product details to help match the part before ordering.

Browse more LED Lights