Description

Overview

Outer equaliser bush for Freighter suits TAA35, TAA36, TAA37 and TAA40 suspension setups that use a rubber outer bush in the equaliser assembly. It supports movement at the outer equaliser point, so the suspension can articulate while the bush cushions load transfer and road shock.

As the old bush hardens, splits or wears loose, the equaliser can pick up unwanted movement and knock through the suspension. This replacement matches the key service dimensions for that outer position, which makes it easier to service worn Freighter mechanical suspension hardware.

Features

• Rubber outer equaliser bush for Freighter TAA-series mechanical suspension
• 92mm outside diameter with 55mm / 59mm inside diameter
• 50mm overall length for the outer equaliser position
• Suits Freighter TAA35, TAA36, TAA37 and TAA40 suspensions

Specifications and Materials

This rubber bush measures 92mm outside diameter, 55mm / 59mm inside diameter and 50mm overall length, so it fits the common outer equaliser position used in these Freighter suspension families.

Part number: SP1105.

For general elastomer material characteristics, see the engineering elastomer guide

Compatibility and Fitment

Check the bush position, outside diameter, stepped inside diameter and overall length before ordering, especially if the suspension has already seen previous repair work. This cross-reference listing means this part is a suitable replacement for the part numbers and applications shown. Some changes in installation may be required. BP1105, FL80.2004, FL802004, WT1105, 09.1105.0, 0911050, 203-01525, 20301525, IT1105

The outer equaliser bush for Freighter suits outer equaliser locations only, so do not confuse it with the matching inner bush used in the same suspension family.

Compliance and Safety

Press the bush in square and support the housing correctly during installation, because twisted or damaged rubber can shorten service life. Also inspect the equaliser eye and hardware for wear, as a damaged bore or worn pin will quickly affect the new bush.

Trailer Applications

This bush suits workshop repairs on Freighter TAA35, TAA36, TAA37 and TAA40 trailer suspension systems where the outer equaliser position has worn or started moving in the housing. It also makes sense during strip-down work when the suspension is already apart, because replacing a tired bush at that stage avoids doing the job twice.

Cross-reference and Suitability

This part cross-references to or suits the following equivalent part numbers and compatible alternatives:

Why Choose ICS Trailers

This part targets older mechanical suspension service work where dimensions and bush position matter more than broad catalogue descriptions. The outer equaliser bush for Freighter also matches a common Freighter TAA-series suspension family, so it gives workshops a straightforward replacement for the outer equaliser position.

Browse Suspension parts at ICS Trailers