Description

Overview

York Duratrac shock absorber controls axle and beam movement on trailer suspension, so the suspension settles properly over bumps, corrugations and load transfer. This Powerdown replacement suits the compact York Duratrac and related Tecair II shock family, and it fits eye mounts at both ends for trailer suspension service work.

Features

• Matches York Duratrac and related Tecair II trailer suspension layouts
• Carries eye mounts at both ends with 24mm x 58mm fitting size
• Uses low pressure gas damping for trailer suspension control
• Fits replacement work when the existing shock, bushes or mounting hardware are worn

Specifications and Materials

This shock absorber carries eye mounts at both ends, and it works with 24mm x 58mm mount sizes. Collapsed length is 273mm and extended length is 387mm, so it matches the short-body trailer shock layout used in this suspension family. Part number: SP7159P. See the Powerdown low pressure gas shock absorber guide for trailer shock design details

Compatibility and Fitment

Match the York Duratrac shock absorber to the existing eye mount layout, bush size and bolt hardware before ordering. Check that both ends use 24mm x 58mm eye mounts and confirm the shock length suits the suspension already on the trailer. These cross-references show where this part replaces the part numbers and applications listed. Some installations may need minor changes. 002 414, 002414, 212.24.778, 21224778, 212.26.989, 21226989, 312 241, 312241, 40 1700 002 414, 401700002414, P184, SA009TRP, N100550-004, N100550004, SP7067G, SP7067, 626500, 401700004329, 61610442, 401700124223, 61-610442, 787803, 91-2756, 912756, 61.610442

Compliance and Safety

Inspect the shock body, eye bushes, sleeves and mounting bolts during service, especially when the suspension starts bouncing or the shock shows leakage or damage. Replace worn bushes and hardware at the same time, then tighten the mount bolts to the correct workshop procedure so the new unit stays secure in service.

Trailer Applications

Workshops fit this shock on York Duratrac, Tecair II and related trailer suspension where ride control has softened or the original damper has worn out. Because this layout uses eye mounts at both ends, it also makes sense to check the sleeves, bushes and M24 mounting hardware while the shock is off the trailer.

Cross-reference and Suitability

This part cross-references to or suits the following equivalent part numbers and compatible alternatives:

Why Choose ICS Trailers

ICS Trailers also carries shock bushes, bolts and suspension hardware for this mount style, so you can replace the worn shock and the related eye hardware in one service. Browse Suspension parts at ICS Trailers in our Suspension range