Battery Charging Coil 21mm² 175A Anderson Long Tail

Battery Charging Coil 21mm² 175A Anderson Long Tail

$750.00

Heavy-duty Poly-U battery charging coil with two 21mm² conductors and genuine grey 175A Anderson plugs fitted at both ends. Includes protective heat-shrink boots and a 1m long tail for extended reach. Rated at 110A continuous and 200A intermittent at the cable, with 175A connectors. Suitable for high-current trailer battery charging and tailgate-lift power connections.

Part number 100-A224-21MM.

This field is for validation purposes and should be left unchanged.

Description

Overview

A 21mm² battery charging coil carries high-current DC power between the prime mover and trailer for battery charging and tailgate-lift operation. This long-tail Poly-U version features two 21mm² conductors and genuine grey 175A Anderson plugs already fitted at both ends.

The 1m long tail provides additional reach to the vehicle connection, while the coiled cable accommodates movement between the truck and trailer.

Features

  • Two 21mm² conductors with red positive and black negative polarity.
  • Includes two genuine grey 175A Anderson plugs fitted at both ends.
  • Heat-shrink rubber boots protect the connector cable entries.
  • Polyurethane coiled cable with a 1m long tail for extended reach.

Specifications and Materials

The Poly-U cable uses two 21mm² conductors rated at 110A continuous and 200A intermittent. Both ends include fitted grey 175A Anderson connectors with protective heat-shrink rubber boots.

Part number: 100-A224-21MM.

Refer to the Trail-Link technical brochure for conductor specifications and connector details.

Compatibility and Fitment

Match the grey 175A Anderson connections at both ends, confirm polarity and compare the 1m long-tail arrangement with the existing charging lead.

This high-current 2 x 21mm² version differs from lighter 6mm² and 8mm² charging coils and bare-ended configurations. Also check the required reach between the towing vehicle and trailer.

Related Parts

Check the related service parts below against the trailer setup before ordering.

Use Part number Part type
Replacement connector 500-A175-GRY 175A grey Anderson connector
Connector protection 500-A175-MHS Moulded heat-shrink boot
Load-side protection 500-A175-BL 175A Anderson protective boot
Source-side protection 500-A175-BS 175A Anderson protective boot

 

Compliance and Safety

Before energising, confirm red is positive and black is negative, then inspect both connector contacts for heat damage. Keep the coil clear of sharp edges and prevent excessive stretching during turns.

The fitted plugs carry a 175A rating, so do not treat the cable’s 200A intermittent rating as a 200A rating for the complete connection.

Trailer Applications

Fleet workshops use a 21mm² battery charging coil when trailers need high-current power for onboard batteries, tailgate-lifts or tarp equipment. The long-tail configuration provides additional reach where the connection point sits further from the coiled section.

Why Choose ICS Trailers

High-current charging leads can be confused with lighter 6mm² and 8mm² coils, while the 175A grey Anderson plugs must also match the vehicle and trailer connections.

ICS Trailers can help compare your existing charging suzi, connector configuration and tail length before ordering. Send through photos of the existing plugs and details of the trailer battery or tailgate setup if you need help identifying the correct lead and associated connector protection parts.

Browse more Electrical

Online prices apply to website orders only. In-store pricing may differ.