Description

Overview

The foam spray gun with heavy duty bottle helps you apply thick, clinging foam for washdown and disinfecting jobs. It mixes your chosen chemical with water at the gun, so you can cover panels, floors, and equipment without constant bucket refills. Because the foam hangs on longer, it can improve dwell time before you rinse.

Features

This foam spray gun with heavy duty bottle gives you control over foam strength, and it also switches to rinse mode fast.

• Adjustable mix ratio dial with 6 settings for consistent foaming
• Foam wand creates a fan spray, while removal gives a strong rinse stream
• Wide mouth bottle for easier filling and faster cleaning turnaround
• Brass connections for durable hose coupling

Specifications and Materials

• Use: mixes and sprays foaming detergents, degreasers, disinfectants, soaps, and similar cleaners
• Bottle: chemical resistant polyethylene tank
• Spray modes: fan foam with wand fitted, solid stream with wand removed
• Adjustment: 6 step mix ratio selector

Part number: CA1820.
For chemical handling guidance, read the Safe Work Australia guide to using safety data sheets before use.
Because cleaning chemicals vary, always confirm chemical compatibility for your specific product mix and rinse the unit after each job.

Compatibility and Fitment

This is a handheld foam gun designed to connect to a garden or pressure hose supply. So, it suits general washdown tasks where you want foaming application first, then a direct rinse. If you use higher pressure water, check your hose and fittings are rated for that pressure.

Compliance and Safety

Use only chemicals intended for foaming application, and follow the product SDS for dilution and PPE. Also, avoid mixing incompatible chemicals, especially acids and caustics, because reactions can release heat or harmful vapours. When you finish, turn off the water, trigger the gun to relieve pressure, and then store it out of sunlight and away from children.

Trailer Applications

The foam spray gun with heavy duty bottle suits fleet wash bays, workshop washdown, and routine trailer cleaning. For example, you can pre foam a curtain sider, tipper body, or caravan exterior, then rinse in a controlled stream. It also helps on wheel arches and underbody areas, but you should rinse thoroughly to avoid chemical residue.

Cross-reference and Suitability

No published interchange or equivalent part numbers apply for this cleaning accessory.

Why Choose ICS Trailers

ICS Trailers stocks practical washdown gear and consumables for heavy vehicle and trailer operators, so you can keep your equipment presentable and safer to service. If you are unsure which cleaner suits your job, ask for advice and match the chemical to the surface you are cleaning.
Browse Auto Detailing products at ICS Trailers using Auto Detailing at ICS Trailers today.