Description

Overview

Camshaft cover York 1.5in protects the camshaft tube area on York style S-cam drum brake assemblies. It shields the camshaft from road spray and knocks, so the hardware stays cleaner between services. Because foundation brakes sit low and cop plenty of grime, the right cover helps you spot leaks and wear sooner. If you replace worn brake hardware, this camshaft cover York 1.5in gives you a like-for-like fit when the sizes match.

Features

• Cover tube for York style 1.5in S-cam brake hardware
• Consistent 1.5in internal diameter at both ends
• End diameters set up for the cam end and spline end shown below
• Helps reduce contamination around the camshaft tube area

Specifications and Materials

Part number: FB2064.

• Cam end: 1.87in OD, 1.5in ID
• Spline end: 1.92in OD, 1.5in ID
• Overall length: 555mm

For braking system compliance context, review the Australian Design Rule 38 heavy trailer braking systems document.

Compatibility and Fitment

Camshaft cover York 1.5in suits York applications that use a 1.5in camshaft tube internal diameter. Before you order, measure your existing cover length and check both end diameters, because small changes matter. Also inspect camshaft bushes, seals, and dust shields while you have it apart. If the camshaft shows movement or scoring, fix that first so the new cover does not mask the real issue. When you refit components, confirm the camshaft rotates freely and the cover clears nearby brackets.

Compliance and Safety

Only work on foundation brakes when you can support the trailer safely and isolate air supply. Then torque fasteners to the axle or brake manufacturer requirements and re-check adjustment. After assembly, test braking performance at low speed first, because drag or imbalance can show up quickly. If you find contamination from grease or oil, clean and replace affected linings and seals.

Trailer Applications

You will typically see this style of cover on heavy trailer axles with S-cam drum brakes and York type hardware. It fits service work like brake relines, camshaft bushing replacement, and general brake overhauls. However, if your trailer runs a different cam size, choose the correct internal diameter instead. If your assembly uses different end diameters or a shorter cover, match those measurements to avoid a loose fit.

Cross-reference and Suitability

No verified interchange part numbers were confirmed for this camshaft cover.

Why Choose ICS Trailers

ICS Trailers focuses on trailer parts, so you can select using fitment-critical details and sensible application guidance. If you are unsure, compare your existing hardware measurements before you strip the axle down, because that avoids delays. Browse Foundation Brakes parts at ICS Trailers using Browse Foundation Brakes parts at ICS Trailers