Description

Overview

Ezi Turn Vorlandi Fifth Wheel Lube Plate 50mm converts a V.Orlandi fifth wheel top plate into a grease free running surface, reducing mess at the turntable. The two-piece pad kit bolts on and supports smooth articulation between the fifth wheel and trailer skid plate.

Features

Ezi Turn Vorlandi Fifth Wheel Lube Plate 50mm helps workshops cut routine greasing while keeping the coupling face clean.

• Grease free, low-friction contact surface for fifth wheel turning
• Two-piece design to suit V.Orlandi top plate layouts
• Supplied with mounting bolts for secure clamping
• Supports consistent turning feel, reducing binding

Specifications and Materials

This kit suits V.Orlandi fifth wheels and uses a low-friction pad surface that you fix to the fifth wheel top plate after cleaning and inspection. The manufacturer instructions specify bolts, flat washers, nyloc nuts, a label, and a drill bit as the pack contents for new installations.

Follow the manufacturer installation instructions to confirm drilling steps and the 6N.m nut tension requirement

Part number: TT9617.

• Configuration: 2 piece low-friction pad kit
• Fasteners: 6 bolts per side (12 total)
• Maintenance: recheck nut tension at service intervals
• Surface care: keep the pad and trailer skid plate free of debris

Compatibility and Fitment

This cross-reference listing means this part is a suitable replacement for the part numbers and applications shown. Some changes in installation may be required. VORLANDI (2 PIECE), VORLANDI(2PIECE), RP50 / RP10, RP50/RP10, EZIVORLAND1
Remove any existing pad, then clean the fifth wheel until you remove grease and foreign material. However, if the top plate shows cracks or damage, replace it before you drill or clamp the new pads in position.

Compliance and Safety

Trailer kingpin and fifth wheel mismatches occur in the field, so the manufacturer warns you to confirm fitment before and after installation. Always visually check the jaws have locked and the release handle sits in the correct position after coupling.

• Clamp the pads securely before drilling to prevent movement
• Deburr drilled holes and remove swarf, preventing seating issues
• Fit the supplied label where the driver can see it
• Inspect the coupling surface regularly and clean off contaminants

Trailer Applications

For example, Ezi Turn Vorlandi Fifth Wheel Lube Plate 50mm suits prime mover and semi-trailer combinations that run V.Orlandi fifth wheels in 2 inch (50mm) kingpin applications. Fleet operators can also reduce grease consumption while keeping workshop checks simple and repeatable.

Cross-reference and Suitability

This part cross-references to or suits the following equivalent part numbers and compatible alternatives:

Use the list above to confirm you have the correct V.Orlandi pad style before drilling.

Why Choose ICS Trailers

ICS Trailers supplies turntable parts for heavy vehicle trailers and can help you select the correct low-friction pad style for your fifth wheel model. We also focus on practical technical support so you can install the kit correctly and keep coupling inspections straightforward. Browse Turntables at ICS Trailers via Turntables parts and accessories